Husky 27BC201BP-THD Manuel d'instructions télécharger pdf

Ball bearing slides

Friction slides

OPERATOR’S MANUAL

2-DOOR BASE CABINET

MODEL # 27BC201BP-THD

CAPACITIES

SERVICE PARTS

SAFETY

• The maximum load capacity for each shelf is 30 lbs. evenly

distributed. The maximum load capacity per work surface is 500

lbs. evenly distributed.

• Empty weight of the unit is 69 lbs.

• The maximum product weight, including contents in the draw-

ers/shelves and on the work surface, should be no more than

629 lbs.

F1775

DANGER is used to indicate a hazardous situation which,

if not avoided, will result in serious injury or death.

WARNING indicates a hazardous situation which,

if not avoided, could result in serious injury or death.

CAUTION is used to indicate a hazardous situation which, if not

avoided, may result in minor injury, moderate injury, or property

damage.

CAUTION: Read and follow all Safety Rules and Operating

Instructions before rst use of this product.

DANGER

• DO NOT stand on this product. You may fall

or cause product to tip.

• DO NOT open more than one drawer. The product

may become unstable and tip.

• DO NOT step in the drawers. You may fall

or cause product to tip.

• DO NOT mount this product on a truck bed

or any other moving object.

• DO NOT move the product prior to closing

and locking all the drawers. The drawers could come open

and make the product unstable and tip.

CAUTION

• This product is not designed to be directly lifted with a fork lift, or

to be towed with any mechanical devices.

• The maximum weight for each drawer should never be exceeded.

• Only transport this product empty. Properly secure when transporting.

• DO NOT exceed maximum product weight, including contents. See

Capacities for more information.

WARNING

• WEAR SAFETY GLASSES when removing or repositioning

the slides.

• DO NOT pull the unit, push it when moving

• USE THE BRAKES when not moving this product. This will

prevent the product from rolling.

• DO NOT alter this product in any manner. For example, do not

weld external lockbars or attach electrical equipment.

• Keep the product on level surfaces. The product may become

unstable and tip if stored or moved on an uneven surface.

• BE CAREFUL when closing the cover. Remove hands before

the cover closes completely.

• Lubricate lock with graphite, (yearly).

STAINLESS SURFACES:

• Stainless steel can discolor when exposed to pool chemicals,

saltwater or cleaners with bleach.

• Keep your stainless looking new by cleaning with a good quality

all-in-one stainless steel cleaner polish monthly. Frequent clean-

ing will remove surface contamination that could lead to rust.

• Do not clean with steel wool or other abrasive pads.

• Do not use cleaners not specically intended for stainless

steel on stainless surfaces (this includes glass, tile and

counter cleaners).

MAINTENANCE

CALL 1-866-440-3170 FOR SERVICE PARTS. Please provide

the Model Number when calling. To expand your garage storage

project, please visit www.homedepot.com/garagestorage for ad-

ditional product options.

LOCATING MODEL # INFORMATION

Model numbers and other information required for service parts is

located on a white label on the upper right hand corner of the unit.

PAINTED SURFACES:

• Periodically the drawer fronts, drawer trim, and other surfaces

should be cleaned with a mild detergent and water.

• Auto wax will preserve the unit’s luster nish. Apply the wax

as to a car. The wax will also help protect the unit against

scratches.

• Grease and oil can be removed with most standard

cleaning uids. For safety, use a nonammable cleaning uid.

• If drawer liners are supplied, it is recommended they are used

to protect the nish inside the drawers and to make the drawers

easier to clean. The drawer liners may be cleaned

with soap and water.

1 2 3 4 5 6 ... 15 16

Résumé du contenu

Page 1 - OPERATOR’S MANUAL

Ball bearing slidesFriction slidesOPERATOR’S MANUAL2-DOOR BASE CABINETMODEL # 27BC201BP-THDCAPACITIESSERVICE PARTSSAFETY• The maximum load capacity

Page 2 - HARDWARE

EE - 5/16-18 Tornillo de Cabeza Hexagonal (Cant: 16)FF - 5/16 Arandela (Cant: 16)GG - 5/16-18 Tuerca Hexagonal de Seguridad (Cant: 16)HH - Nivelador d

Page 3 - ASSEMBLY

ENSAMBLAJEProceso:• Instale (4) patas niveladores (HH). Puede que sean necesarios algunos ajustes después de que el gabinete esté en la posición des

Page 4 - Step 3 Result

Proceso:• Instale las bisagras LL y KK a las puertas B y C usando (4) EE, (4) FF y (4) GG.• Ajuste con la llave.• Repetición para la otra puerta.Nota

Page 5

Proceso:• Ensambla la cerradura (MM) como se muestra en la gura (6). INSTALACIÓN DE LA CERRADURAElementos necesarios:NN - Dispositivo de seguridad

Page 6 - OPERATION

Proceso:• Pon el imán (JJ) en la puerta (C), en el lugar señalado.• Asegúrese de que el adhesivo posterior esté orientado hacia el armario.• Cierre

Page 7

7FUNCIONAMIENTOEstilo palanca – Levante o baje (dependiendo de la corredera) la palanca de liberación en ambos lados (esto permite que las correderas

Page 8

QUITAR E INSTALAR LAS CORREDERAS DE LA UNIDA• Primero quita el cajón. (Ver la sección A)Para quitar la corredera:• Empuja la corredera hasta que qued

Page 9 - MANUAL DE USUARIO

EE - 5/16-18 Hex Head Screw (Qty: 16)FF - 5/16 Washer (Qty: 16)GG - 5/16-18 Hex Locknut (Qty: 16)HH - Screw leveler (Qty: 4)RR - Mount Plate (Qty: 4)A

Page 10 - FERRETERÍA

Process:• Install (4) levelers HH. Some adjustmnet may be necessary after cabinet is in desired location.• Stand cabinet upright.• Carefully pla

Page 11 - ENSAMBLAJE

4Process:• Place (1) hinge plate MM on each side of the unit at the bottom. Slide plate through the slot and secure each with (2) screws AA. Items Ne

Page 12 - CONSTRUCCIÓN DE LA PUERTA

5Figure 5Process:• Assemble lock MM as shown in gure 6. Figure 6LOCK INSTALLATIONItems Needed:NN - Single Bitted Lock (Qty: 1)DOOR ATTACHMENTItems

Page 13 - ADITAMENTO DE LA PUERTA

6OPERATIONRelease• Empty the drawer.• Fully extend the drawer.REMOVING DRAWERSProcess:• Place magnet JJ on door C in the locations noted. • Make

Page 14 - INOXIDABLE

7Locking the Unit: • Insert the key and turn fully to the left.• Remove key.Unlocking the Unit:• Insert the key and turn fully to the right.•

Page 15 - FUNCIONAMIENTO

Page 16

Cojinetes de bolasCorrederas de friccionMANUAL DE USUARIOGABINETE DE BASE, DE 2 PUERTASMODELO NO. # 27BC201BP-THDCAPACIDADPIEZAS DE SERVICIOSEGURIDAD•

Commentaires sur ces manuels

Pas de commentaire

Husky 27BC201BP-THD Manuel d'instructions

Naviguer en ligne ou télécharger Manuel d'instructions pour Non Husky 27BC201BP-THD. Husky 27BC201BP-THD Instructions / Assembly Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Non Husky 27BC201BP-THD